lunes, 18 de febrero de 2013

WRAP-AROUND LABELLING MACHINE (II)



Description
Wrap-around labelling machine for up to ø80 diameter products. Efforts have been made at achieving a user-friendly machine.
The main difference with the basic labelling machine is the presence of integral protection cowling and access lids with security microphones. This feature is required by the internal regulations of some customers.
Multiple optional accessories can be added on to the basic versions until a fully assembled machine is obtained.
Different configurations can be programmed. Continuous labelling will yield the highest production rates, while stationary labelling with cylindrical product centering  is more adequate for products with certain features (fully wrapped labels, labels with the back in the same reel, products with irregularities at the base), at the expense of a lower yield.
These machines have a full range of optional accessories especially devised to fulfil the customer needs, for instance:

Thermal printer.
Thermal transfer printing.
Desktop printer in queue
Disk spacer
Thickness detector for transparent labels.
Reel pre-end detector.
Mark reading by photocell.
Print reading by artificial vision camera.
Traceability software.
Placed label UV detector.
Non-compliant product expulsion.
Container positioning by optical fiber mark detection (only for cylindrical product centring).
Motorised pre-unwinder for ø400 reels.
Versions for multi-layered labels (leaflet, brochure, etc)

Features

Speed and yield.
      Continuous production: up to 150 units per minute (depending on container and label length)
      Stationary production: up to 100 units per minute (depending on container and label length)

Measurements.
      Ø inner reel tube (recommended): 76 mm.
      Ø inner reel tube (minimum): 36 mm.
      Ø outer reel (maximum): 290 mm.
      Minimum label length: 10 mm.
      Maximum label length: 250 mm (according to container)
      Minimum label width: 15 mm.
      Maximum label width: 204 mm (liner included)
      Minimum distance between labels: 2 mm
      Transparent labels (with thickness detector) allowed.
      Minimum container measurements: ø20 with vertical stability.
      Maximum container measurements: ø80 with wrap-around label.
      Other measurements to be determined. 

Power supply
      Electric power supply: 380 V AC+N+T 50Hz
      Pneumatic power supply: 5 bar
      Installed power: 500 KVa
      Surge protection: 3 A
      Dimensions (length x width x height): see attached blueprint

Complies CE regulation.
The documentation includes CE machine certificate, electric and pneumatic diagrams, list of components and user’s manual.






No hay comentarios:

Publicar un comentario